Tuesday, November 15, 2016

Simple Steps To Be Followed In A Chimney Cleaning

By Christine Scott


Chimneys are types of structures that are providing a proper ventilation for smoke and flue gases that are coming from stoves, fireplaces, boilers, or furnaces towards the outside atmosphere. Typically, these are positioned vertically for ensuring that gases are flowing smoothly upwards. A flue is the space inside the chimney. Chimneys are often found in steam locomotives, ships, and buildings.

Burning fires that may come out from chimneys can sometimes be difficult to avoid. These may cause fire because of some substances like soot and creosote which are flammable and sticky. Doing a chimney cleaning Windsor Locks CT may be done if you will be hiring a professional to do the job, but this may cost you much. So here are some simple steps that you can follow to do a safe cleaning by yourself.

The steps involve 4 different methods. The first method is preparing in cleaning the chimney. In this method, you must first determine if chimneys do need to be cleaned. It is important for chimney to be cleaned for at least once in a year. But if being used frequently, clean it more often. Check if there are some animals in it. There are times when you have not checked it already awhile.

Next is to measure the flue. When you do the method for cleaning, be sure to use the appropriate tools and be sure that these tools have sizes that would fit in the flue. Measuring all the sides from the fireplace or the bottom part is important, then after, by the use of a ladder, climb up to measure the top. All necessary supplies can be purchased from a nearby hardware store.

Wear an appropriate clothing when doing the process. Old clothes may be used to avoid messing up the new ones due to soot. Bandannas may be used as hair covering, gloves for the protection of hands, then goggles for the protection of eyes. Placing a plastic tarp or a drop cloth for covering the floor will avoid it to get dirty. Then locate its dumper handle and clean it using a brush.

Second is to start cleaning the top then down to the bottom part. You need first to set up the ladder to be used in climbing the roof. You may also set up your ladder outside the house and lean it into house, but be sure that it is safe. So start by assembling the pipe section and brush to scrub the flue. The pipe may be added with many sections as the extensions for the brush.

The third method is to clean from bottom to top. Steps in the second method are also applied in using the pipe sections and brushes. After doing the same steps to clean from the bottom to the top, use the pulley system along with a brush and place it on the roof.

In this step, it might be helpful if you are going to hire someone for holding one side if the rope from the roof then the other side will be dropped. At the center of a pulley is the brush. Then work with your partner together by pulling that pulley rope in an up and down manner. It works by scrubbing the brush in chimney flue.

The fourth and last method involves cleaning the entrance of the flue by making use of a spade and a shovel. After this, reattach then the damper. Debris in the drop cloth or plastic tarp should be cleaned using dustpan and broom.




About the Author:



0 comments:

Post a Comment