Filtration is the removal of contaminants from waters to get waters that is fit for normal domestic consumption or for irrigation of fields and also for industrial uses (eg. For use by establishments for food). With the gradual depletion of natural sources of drinking waters (deep waters), is increasingly resorting to surface waters (seas, rivers, lakes and dams) (survival water purification systems).
The sedimented material is conveyed towards a hopper formed on bottom of tank, by means of mechanical pickers that sweep the bottom of same, and from here pumped to sludge treatment line. The size of tanks depends on detention time which is a function of characteristics of solid sediments present in raw waters and the type of decanter chosen.
Filtration is a treatment used to remove suspended solids from the waters not sediment. Treatment consists in passing the raw waters through a filter medium (bed / filter layer or filter cloth). In case of filter layer, the filter material can be made from quartz sand, anthracite or activated charcoal. During filtration the filtered solids gradually begin to clog the filtering layer resulting in an increase of load losses, which is increased to overcome the supply pressure. Exceeded the maximum value of said pressure must be made to interruption of flow and to cleaning of filter medium.
However, the fact that the waters is by nature a solvent makes it somewhat problematic the effective elimination of many unwanted substances. The waters is entered into a tank head from which it originated the system of waters supply - drinking. The waters containing different types of organic substances and inorganic, hereinafter classified, that must be removed during the purifying treatment. Physical treatments simple: they are articulated in a single step, eliminating the suspended solids and sediments those not coarse sediments (screening and sedimentation) and non-settleable (sieving and filtration).
ants: the most used today are the polyelectrolytes. The agitation speed should be neither too low to prevent sedimentation of flakes, or too high to avoid breakage of flake. The slow agitation is achieved by use of mechanical mixers (dynamic system) or by placing a series of baffles in tank (static system).
Filter volume: the filtration takes place by means of a three-dimensional porous matrix said filter bed consisting of discrete materials of small dimensions (eg. Sand); in this case the particles are retained within filter medium. The effectiveness of a filter material depends on certain properties of particles such as size, shape and surface chemistry. The filters lenses are the first filtration system used in filtration, but they are currently little used. The slow filtration can be used in case of turbidity 10 ppm.
The waters containing sediments that can create several problems during the cycle of filtration. This law is valid for strictly spherical particles immersed in a liquid at rest and at constant temperature where the downward motion is not influenced neither by the presence of other particles or from the container walls.
What lens filters the filtering action is exerted by the biological film that develops on the surface of filter in 10-15 days (aging time of filter). The film filter is very sensitive to mechanical disturbances and organic contaminants. During the period of maturation of film the filtered waters is not considered potable. The inflow of waters into filter takes place from above while runoff occurs from the bottom; the filtration rate.
The sedimented material is conveyed towards a hopper formed on bottom of tank, by means of mechanical pickers that sweep the bottom of same, and from here pumped to sludge treatment line. The size of tanks depends on detention time which is a function of characteristics of solid sediments present in raw waters and the type of decanter chosen.
Filtration is a treatment used to remove suspended solids from the waters not sediment. Treatment consists in passing the raw waters through a filter medium (bed / filter layer or filter cloth). In case of filter layer, the filter material can be made from quartz sand, anthracite or activated charcoal. During filtration the filtered solids gradually begin to clog the filtering layer resulting in an increase of load losses, which is increased to overcome the supply pressure. Exceeded the maximum value of said pressure must be made to interruption of flow and to cleaning of filter medium.
However, the fact that the waters is by nature a solvent makes it somewhat problematic the effective elimination of many unwanted substances. The waters is entered into a tank head from which it originated the system of waters supply - drinking. The waters containing different types of organic substances and inorganic, hereinafter classified, that must be removed during the purifying treatment. Physical treatments simple: they are articulated in a single step, eliminating the suspended solids and sediments those not coarse sediments (screening and sedimentation) and non-settleable (sieving and filtration).
ants: the most used today are the polyelectrolytes. The agitation speed should be neither too low to prevent sedimentation of flakes, or too high to avoid breakage of flake. The slow agitation is achieved by use of mechanical mixers (dynamic system) or by placing a series of baffles in tank (static system).
Filter volume: the filtration takes place by means of a three-dimensional porous matrix said filter bed consisting of discrete materials of small dimensions (eg. Sand); in this case the particles are retained within filter medium. The effectiveness of a filter material depends on certain properties of particles such as size, shape and surface chemistry. The filters lenses are the first filtration system used in filtration, but they are currently little used. The slow filtration can be used in case of turbidity 10 ppm.
The waters containing sediments that can create several problems during the cycle of filtration. This law is valid for strictly spherical particles immersed in a liquid at rest and at constant temperature where the downward motion is not influenced neither by the presence of other particles or from the container walls.
What lens filters the filtering action is exerted by the biological film that develops on the surface of filter in 10-15 days (aging time of filter). The film filter is very sensitive to mechanical disturbances and organic contaminants. During the period of maturation of film the filtered waters is not considered potable. The inflow of waters into filter takes place from above while runoff occurs from the bottom; the filtration rate.
0 comments:
Post a Comment