Modern-day bicycles have become so versatile that they can be used for very many purposes. They are used as a source of employment and for transportation purposes in some areas of the world. Such purposes are more common in developing countries. In more developed nations, they are used more for competition, recreational, and fitness purposes. However, all the aforementioned purposes can only be achieved if proper bicycle tune up is done.
Injury can be caused to riders and other people if one takes a poorly maintained bike to the road. Besides sustaining and causing injuries to others, one can also damage property and be required to pay expensively for them. In addition to that, components of a bike that is not well maintained also wear fast. If one is daring enough, they can do most of the steps involved in a tune up because they are pretty simple and take a short time.
The job is manual in nature and some people do not like such jobs. In such a case, one should visit any of the many bike shops in Cincinnati, Ohio to have a good tune up. Charges by most Cincinnati bike shops are within reasonable limits and they are run by experts in this field. That implies that an effective job can be done within minutes. The rest of this writing is about some of the basic tips one can follow for a DIY project.
Cleanliness is always the first thing that should be considered. A bike that is thoroughly cleaned is half-way maintained. Cleaning should be done using cleaning products that do not cause harm to the environment, people, or animals. There is a wide variety of biodegradable cleaners on the market to choose from. Special attention should be paid to cassettes, derailleurs, brakes, chains, chain rings, pedals, and frames during cleaning.
Cleaning may require dismantling some parts of the bike in order to clean them properly. Such parts ought to be dismounted carefully and cleaned well. Before they are returned, bicycle grease must be applied well. Grease is preferable over oil because it last longer, hence provides protection for a longer period.
Another part to pay attention to is the brake system. When checking the brake system, one should press the brake levers while the rear wheel is spinning and observe how long it take for the wheels to stop rotating. An effective brake system should stop the wheels instantly. Next, the brake pads should be checked for uneven wearing and other damages. They must be replaced if they got used up.
The drivetrain should also be checked for efficiency. Normally the force the rider applies on the pedals is transmitted to the rear wheel by the drivetrain. For that reason, it should be serviced and greased effectively. Any loose components must be tightened and replaced whenever it is necessary. The wheels should also be checked to ensure that they are rotating properly and that they are not damaged by brake pads.
Finally, to make sure everything is set, a test ride should be conducted. All cannot be okay without a test ride. Problems are likely to be realized during the test ride and they should be solved before one ventures out.
Injury can be caused to riders and other people if one takes a poorly maintained bike to the road. Besides sustaining and causing injuries to others, one can also damage property and be required to pay expensively for them. In addition to that, components of a bike that is not well maintained also wear fast. If one is daring enough, they can do most of the steps involved in a tune up because they are pretty simple and take a short time.
The job is manual in nature and some people do not like such jobs. In such a case, one should visit any of the many bike shops in Cincinnati, Ohio to have a good tune up. Charges by most Cincinnati bike shops are within reasonable limits and they are run by experts in this field. That implies that an effective job can be done within minutes. The rest of this writing is about some of the basic tips one can follow for a DIY project.
Cleanliness is always the first thing that should be considered. A bike that is thoroughly cleaned is half-way maintained. Cleaning should be done using cleaning products that do not cause harm to the environment, people, or animals. There is a wide variety of biodegradable cleaners on the market to choose from. Special attention should be paid to cassettes, derailleurs, brakes, chains, chain rings, pedals, and frames during cleaning.
Cleaning may require dismantling some parts of the bike in order to clean them properly. Such parts ought to be dismounted carefully and cleaned well. Before they are returned, bicycle grease must be applied well. Grease is preferable over oil because it last longer, hence provides protection for a longer period.
Another part to pay attention to is the brake system. When checking the brake system, one should press the brake levers while the rear wheel is spinning and observe how long it take for the wheels to stop rotating. An effective brake system should stop the wheels instantly. Next, the brake pads should be checked for uneven wearing and other damages. They must be replaced if they got used up.
The drivetrain should also be checked for efficiency. Normally the force the rider applies on the pedals is transmitted to the rear wheel by the drivetrain. For that reason, it should be serviced and greased effectively. Any loose components must be tightened and replaced whenever it is necessary. The wheels should also be checked to ensure that they are rotating properly and that they are not damaged by brake pads.
Finally, to make sure everything is set, a test ride should be conducted. All cannot be okay without a test ride. Problems are likely to be realized during the test ride and they should be solved before one ventures out.
0 comments:
Post a Comment